Chemical Material Microwave Drying Equipment

Microwave equipment is used for drying and dehydrating powdery and granular materials. Conventional heating such as flame, hot air, steam drying, etc., utilizes the principle of heat conduction to transfer heat from the outside of the object to be heated, and gradually raises the temperature of the center of the object, which is called external heating. It takes a certain amount of time for the center to reach the desired temperature, and objects with poor thermal conductivity take longer.
These traditional drying methods take a long time, consume large amounts of electricity, heat is not uniform, flipping up and down, labor intensity is large, and microwave energy drying characteristics, microwave energy can penetrate inside and outside the object while heating, the frequency is 2450MHZ, at 24 per second. With an oscillation of 50 million times, the water molecules are also oscillating 10,000 times. The molecules rub against each other to generate heat and heat themselves. Therefore, it can be widely used for drying and dewatering of chemical materials.
For example: cobalt oxalate, lithium hydroxide, nickel oxyhydroxide, mannose pure, ammonium paratungstate, lithium cobaltate, barium carbonate, barium carbonate, etc., the water content is 0.5% after drying, and the drying time is only 6 to 15 minutes. The drying temperature can be controlled at 80~90 °C.
Chemical Material Microwave Drying Equipment Features
1, practical, cost-effective
2, easy to control, easy to operate and flexible, less manual use.
3. Save time and high output.
4. Less energy consumption.
5. The production intensity is small and the land occupation is small.
6, environmentally friendly and clean. No air pollution, no pollutants.
7, easy to control, advanced technology. Compared with the conventional method, the device is ready to use; without thermal inertia, the operation is flexible and convenient; the microwave power is adjustable.
Chemical Material Microwave Drying Equipment technical parameters:
Microwave frequency: 2450MHZ±50 MHZ
Power setting: 6-300KW
Transmission speed: 0-2m/s
Input voltage: three-phase AC380V
Cabinet color: silver white
Machine material: industrial grade stainless steel
Microwave leakage limit: ≤1 (MW/Cm2)
Chemical Material Microwave Drying Equipment Product Type:
Special production equipment for rubber additives drying, microwave drying equipment for chemical catalysts, high-temperature sintering, metallurgical equipment, sewage treatment equipment, special production equipment for drying calcium silicate, special production equipment for chemical powder drying, special production equipment for liquid sterilization extraction, etc.
Chemical Material Microwave Drying Equipment is suitable for materials:
Rubber additives, coatings, pigments, saponite, titanate, tungsten carbide, uranium oxide, wall tile, zinc oxide, zirconium silicide, aluminum chloride, aluminum hydroxide, aluminum phosphate, aluminum silicate, aluminum sulfate, chlorine Ammonium, ammonium molybdate, ammonium nitrate, ammonium phosphate, ammonium sulfate, ANC catalyst, barium sulfide, arsenic oxide, barium chloride, barium hydroxide, barium sulfate, bauxite waste liquid, calcium phosphate, calcium propionate, silicon Calcium acid, calcium sulfate, catalyst, tire cracking, rubber cracking, olivine, silica, fluorspar, diatomaceous earth, activated clay, high-phosphorus iron ore, kaolin, olivine, aminophenol, melamine, cyanuric acid, p-aminobenzene Sulfonic acid, antioxidant 168, phenolic phenol As, stearate, aniline, nitroaniline, chlorinated paraffin, calcium stearate, titanate, tungsten carbide, uranium oxide, aluminum sulfate, ammonium chloride, molybdenum Ammonium acid, ammonium nitrate, ammonium phosphate, ammonium sulfate, ANC catalyst, barium sulfide, arsenic oxide, barium chloride, barium hydroxide, barium sulfate, beverage, wine, milk, soy sauce, edible vinegar, pharmaceutical reagents, medium solution, etc.